Features and Benefits

Warranty

20-Year Excel Warranty for wind speeds up to 110 mph.

Product Use

Designed for use on parapet walls that range from 6- to 32-inches wide and are available in standard and custom sizes.


The coping cap is formed with allowance for expansion and contraction. The standard support cleat shall be a 20ga. galvanized steel cleat with pre-slotted fastener holes. A 6-in. wide concealed joint cover with a pre-finished channel on the top surface to channel water shall be installed at coping joints. Installation shall conform to Manufacturer’s written instructions.

Details
  • Internal metal chair drainage system eliminates caulked joints.
  • Matching corners, end caps, and other accessories are factory fabricated.
  • Tested to meet the ANSI/SPRI ES-1 Roof Edge Standard Test Protocol RE-3 for parapet wall copings.
  • Pre-punched holes and supplied fasteners for proper attachment and fast installation.
Technical Data
Standard Sizes Material Gauge
Wall Sizes: 6-in. to 32-in. Aluminum Standard: .050-in. & .063-in.
Standard Leg Size: 6-in. Galvanized Steel Standard: 24 Gauge up to a 24-in. wall
Technical Data
Miter Leg Length Material Gauge
<16-in. Wall = 23-1/4-in. Copper and Stainless Steel By Request Other Metal Thicknesses By Request
17-in. to 23-in. = 29-1/4-in. Copper and Stainless Steel By Request Other Metal Thicknesses By Request
24-in. to 32-in. = custom length Copper and Stainless Steel By Request Other Metal Thicknesses By Request

Product Downloads

Order Specifications

Wind Calculator

Please note that these calculations are based on U.S. measurements and roofing practices, and may not be sufficient or applicable for use outside of North America.