VersiTrim One Coping

Tapered, Flat, and Existing Slope

VersiTrim One Coping is designed for use on parapet walls ranging from 4- to 12-inches wide, and is compatible with all commercial roofing systems. The system includes a continuous galvanized cleat, and can be made with face heights from 3- to 6-inches and back legs from 2- to 6-inches to accommodate most parapet walls. This coping product is ANSI/SPRI/FM 4435/ES-1 Tested.

Features and Benefits
Warranty	The perimeter edge metal components and/or a wind speed-specific requirement may be available in the roof system manufacturer’s full system warranty and provide additional value. Please contact your roof system manufacturer to verify and comply with all requirements of their total system warranty.
Details	- ANSI/SPRI/FM 4435/ES-1 tested to comply with International Building Code -12'-0" lengths make for quick installation and low labor costs -Pre-punched hole in cover for easier installation - Product provided with splice plates and fasteners - Pre-fabricated miters and other accessories are availalbe with this product
Technical Data	Cover Materials: 24 ga. and 22 ga. Steel and.040", .050", and .063" aluminum Sizes: Face/Outside: Min. 3" Max. 6" Back/Inside: Min. 2" Max. 6" Wall Size: Min. 4" Max. 12"

Product Downloads

Wind Calculator

Please note that these calculations are based on U.S. measurements and roofing practices, and may not be sufficient or applicable for use outside of North America.

ZIP Code*

Project Name

Build Height (feet)*

Importance Classification (I, II, III, IV)*

Exposure (B, C or D)*

Provide a Wind Speed to Override ASCE Lookup Values (optional):

Provide an ASCE Version to Override Location Lookup Values (optional):